LG Dryer Repair Cost in Newton, MA: 2026 Guide

LG dryer repair in Newton, MA usually costs $120 to $500. Thermal fuses, thermistors, and belts tend to be the most affordable fixes. Heating elements, gas igniters, and drum rollers fall in the middle. Drive motors and control boards sit at the top of the range.

What you pay depends on whether your LG dryer is electric or gas, which part failed, and how easy the dryer is to reach. A stacked dryer in a closet takes more time than a freestanding unit in an open laundry room. Many slow-drying complaints trace back to airflow rather than a broken part, so a proper diagnosis matters before parts are ordered.

Quick Cost Summary

These are general repair estimates, not Promix quotes. Actual cost depends on your LG appliance model, diagnosis, parts, and labor.

Average LG Dryer Repair Cost in Newton

The most common LG dryer repairs in Newton fall between $150 and $375. That includes heating elements on electric models, igniters and gas valve coils on gas models, belts, rollers, and safety fuses.

What changes the price:

Electric vs gas. Gas dryers have an ignition system with an igniter, flame sensor, and valve coils. Electric dryers use a heating element. Parts and diagnosis differ.

Part type. A thermal fuse is inexpensive. A drive motor or main board is not.

Access. Stacked units and tight closets may need to be separated or pulled out.

Age and condition. Older dryers may have worn rollers or bearings alongside the main failure.

Not sure what is causing the problem?

A dryer that runs without heat might have a blown fuse, a failed element or igniter, or a restricted vent. Promix Appliance Repair can diagnose your LG dryer and explain the repair options before work moves forward.

Common LG Dryer Problems and Repair Costs

LG Dryer Not Heating

The drum turns, but clothes come out cold or barely warm. On electric LG dryers, the usual causes are a failed heating element, high-limit thermostat, or thermal fuse. On gas models, a weak igniter or failed gas valve coils are common. Most no-heat repairs cost $120 to $375.

LG Dryer Taking Too Long to Dry

This is often an airflow problem. Lint buildup in the vent, a crushed duct behind the dryer, or a blocked exterior vent hood forces the dryer to work harder. LG dryers may show a d80, d90, or d95 code when airflow is restricted. A faulty moisture sensor can also end cycles early or run them long. Sensor repairs typically cost $120 to $250.

Promix diagnoses and repairs the dryer itself. If the problem is a long or clogged duct run, Promix can point you to what needs attention.

LG Dryer Not Starting

If the display lights but the drum won't turn, check that the door is fully closed. A failed door switch, blown thermal fuse, or start circuit issue can also stop the dryer. A PS code on electric models may indicate a power supply or wiring issue at the outlet. Repairs range from $120 for a switch or fuse to $550 for a control board.

Drum Not Turning

The motor hums or runs, but the drum stays still. A broken belt is the most common cause. A failed idler pulley or a seized motor can cause the same symptom. Belt and pulley repairs usually cost $150 to $300. Motor replacement typically runs $250 to $500.

Dryer Shutting Off Mid-Cycle

A dryer that stops partway through may be overheating because of poor airflow, or a thermistor may be sending bad readings. Motor overheating can also cause shutdowns. Repairs run $120 to $500 depending on the cause.

Heating Element or Gas Ignition Failure

Electric heating elements can break or short. Gas igniters weaken over time and may glow without lighting the burner. Each repair typically costs $175 to $375.

Rollers, Thermostat, Motor, and Control Board

Worn drum rollers cause rumbling or thumping. High-limit and cycling thermostats protect the dryer from overheating and can fail open. The drive motor and main control board are the most expensive parts, at $250 to $550.

LG Dryer Repair Cost by Part

LG Dryer Error Codes

• d80, d90, d95: airflow restriction, with higher numbers meaning more blockage.

• tE1 / tE2: thermistor or temperature sensing fault.

• PS: power supply issue on electric dryers, often outlet or wiring related.

• HS: humidity or moisture sensor fault.

• dE: door open or door switch fault.

Vent-related codes often clear once airflow is restored. If the code returns, schedule a diagnosis.

What Makes LG Dryer Repair More Expensive?

Stacked dryers and closet installations add labor. Gas dryers require careful work around the gas connection. Steam and smart models use more expensive control boards. A dryer that overheated because of a restricted vent may have damaged more than one part, such as a fuse and a thermostat. Older models may need back-ordered parts.

Winter and Cold-Weather Issues in Newton

Newton snowstorms can bury exterior dryer vent hoods. Ice can freeze the vent flap shut. Either problem cuts airflow, which leads to long dry times, overheating, and d80-series codes.

After a storm, clear snow away from the exterior vent and make sure the flap opens freely. In basement laundry rooms, a stuck-open flap can let cold air backdraft into the dryer, which can also slow drying.

Can You Check Anything Yourself?

• Clean the lint screen before every load.

• Check the exterior vent hood for snow, ice, or lint buildup.

• Make sure the vent duct behind the dryer isn't crushed or kinked.

• Confirm the breaker hasn't tripped. Electric dryers use a double breaker.

• Make sure the door closes completely.

If you smell gas, stop using the dryer, leave the home, and contact your gas utility from outside. Do not open the dryer cabinet or work on gas lines yourself.

Is It Worth Repairing an LG Dryer?

Dryer repairs are usually less expensive than washer repairs, so repair often makes sense. Fuses, elements, igniters, belts, and rollers are routine fixes.

The decision gets harder when the dryer is older and needs a motor or control board. Consider its age, whether the matching washer is also aging, the cost of a comparable new dryer, and installation effort for stacked or closet units.

Before replacing your LG dryer, consider having the actual failure diagnosed.

A heating component, sensor, belt, or blocked vent may be the only issue. Promix Appliance Repair serves homeowners in Newton and can help identify the problem.

LG Dryer Repair in Newton, MA

Older homes in Auburndale and Newton Highlands often have basement laundry with long vent runs to the outside. Condos frequently have stacked dryers in closets with limited airflow. Promix technicians work in both kinds of spaces and back repairs with a labor and parts warranty.

Need LG Dryer Repair in Newton, MA?

If your LG dryer is not working properly, Promix Appliance Repair can diagnose the problem and explain your available repair options.

Promix serves Newton and surrounding Greater Boston communities.

Call Promix Appliance Repair: (781) 666-9565

Or request service through PromixAppliance.com.

Same-day appointments may be available depending on technician availability.

Frequently Asked Questions

How much does LG dryer repair cost in Newton, MA?

Most LG dryer repairs cost $120 to $500. Drive motors and control boards are at the high end.

Why is my LG dryer running but not heating?

On electric models, check the heating element, thermal fuse, and thermostat. On gas models, the igniter or gas valve coils are common causes.

What does d80 mean on an LG dryer?

d80 means the dryer detects about 80 percent airflow restriction. Clean the lint screen and check the vent for blockages.

How much does it cost to replace an LG dryer heating element?

LG heating element replacement typically costs $175 to $375, including parts and labor.

Is it worth repairing an LG dryer?

Usually, yes. Most dryer repairs cost less than a new dryer, especially for stacked and premium models.

Can a blocked vent damage my dryer?

Yes. Restricted airflow makes the dryer overheat, which can blow fuses and wear out heating parts.

Can Promix repair LG gas and electric dryers in Newton?

Yes. Promix Appliance Repair repairs both gas and electric LG dryers in Newton and surrounding communities.